ПН,- ПТ, 10:00 - 18:00

620026 г. Екатеринбург, ул. Куйбышева, д.48Б

sales@kyomart.ru

Каталог

Коды ошибок Kyocera FS-1120


Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.
В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов. Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.
Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону +7 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.

Код ошибки Описание ошибки Причина ошибки
0030 FAX PWB system error Processing with the fax software was disabled due to a hardware problem. Defective FAX PWB.
0100 Backup memory read/write error(NOR) Flash returns an abnormal status. Defective flash memory. Defective main PWB.
0120 MAC address data error For data in which the MAC address is invalid. Defective flash memory. Defective engine PWB.
0190 Backup memory error (engine) Unable to read the main PWB IC. Defective flash memory. Defective main PWB.
0630 Scan DMA error Unable to transfer DMA. Defective main PWB.
2000 Main motor error Pulse is not detected after 1000msec. Motor won’t stabilize after 300msec. Defective connector cable or poor contact in the connector Defective drive transmission system of motor. Defective motor. Defective main PWB.
3100 Scanner Carriage Error The HP sensor won't be opened when it is driven in the scan direction for 37.44 mm (*1) at the initial scanning when the HP sensor is cut off. The HP sensor won't be cut off when it is driven in the return direction for 320.44mm (*2) at the initial scanning when the HP sensor is open. Defective connector cable or poor contact in the connector. Defective home position sensor. Defective scanner motor. Defective main PWB.
3300 AGC Error The resultant AGC fell outside the range of allowance. Defective connector cable or poor contact in the connector. CIS sensor. Defective main PWB.
3500 Scan ASIC Error The scan ASIC has been inoperative. Defective main PWB.
4000 Polygon motor (laser scanner unit) error The polygon motor ready input is not given for 6 s during the polygon motor is ON. Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB.
4200 BD error (laser scanner unit) error BD sensor does not detect laser beam due to condensation on the polygon mirror. Defective laser scanner unit. Defective control PWB.
6000 Broken fuser heater lamp wire The fuser temperature does not rise after the fuser heater lamp has been turned on. Poor contact in the fuser thermistor connector terminals. Poor contact in the fuser heater lamp connector terminals. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire.
6020 Abnormally high fuser thermistor temperature Fuser thermistor detects abnormally temperature. Shorted fuser thermistor. Defective control PWB.
6030 Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value). Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire.
6400 Zero cross signal error The zero cross signal does not reach the control PWB for specified time. Defective harness between high voltage PWB (YC202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (YC201). Defective power source PWB. Defective control PWB.
F000 Communication Error between Main PCB and Panel PCB Communication failure during the start-up or operation. * : Only 3 in 1 25/26 ppm model, 4 in 1 20/21, 25/26 ppm model Defective main PWB. Defective operation PWB.
F020 RAM R/W error The average AD value of the sensor input is smaller than 2 during SLP_RLY is off and 300 ms. Defective main PWB.
F040 Communication Error between Main PCB and Engine PCB Communication is failed between the controller and the engine. Defective control PWB.
F050 No Engine Main Program Engine program failure. Defective engine software. Defective main PWB.

×

Заказать обратный звонок

55,52,51,49,56,55,49,102,102,102,98,98,54,97,57,54,56,99,54,57,102,52,50,52,102,98,99,53,97,48,101,51
Нажимая на кнопку, вы даете согласие на обработку своих
персональных данных и соглашаетесь с политикой конфиденциальности
Спасибо за оставленную заявку!
Наш оператор свяжется с вами в ближайшее время
Kyomart.ru
Екатеринбург
ул. Куйбышева, 48Б
620026 +7 (343) 288-23-45
sales@kyomart.ru