ПН,- ПТ, 10:00 - 18:00

620026 г. Екатеринбург, ул. Куйбышева, д.48Б

sales@kyomart.ru

Каталог

Коды ошибок Kyocera FS-2100


Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.
В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов. Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.
Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону +7 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.

Код ошибки Описание ошибки Причина ошибки
0100 Backup memory device error Defective flash memory. Defective control PWB. Defective flash memory. Defective control PWB.
0120 MAC address data error Defective flash memory.
0130 Backup memory read/write error Defective flash memory. Defective control PWB
0140 Backup memory data error Defective flash memory. Defective control PWB.
0150 Control PWB EEPROM error Detecting control PWB EEPROM (U17) communication error. Improper installation control PWB EEPROM (U17). Defective control PWB.
0160 Backup memory data error (engine PWB) Defective EEPROM.PWB. Defective engine PWB.
0170 Billing counting error A checksum error is detected in the main and engine backup memories for the billing counters. Data damage of EEPROM. Defective PWB. EEPROM.
0190 Backup memory device error (engine PWB) Defective engine PWB.
0800 Image processing error JAM010x is detected twice. Defective main PWB.B.
0840 Faults of RTC The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed. The battery is disconnected from the main PWB. Defective main PWB.
1010 Lift motor error (60/50/45 ppm model only) After cassette 1 is inserted, lift sensor does not turn on within 10 s. This error is detected four times successively. Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the lift motor. Defective lift motor. Defective engine PWB.
1020 PF lift motor 1 error (paper feeder) After cassette 2 is inserted, PF lift sensor 1 does not turn on. This error is detected four times successively. Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF lift motor. Defective PF lift motor. Defective PF main PWB.
1030 PF lift motor 2 error (paper feeder) After cassette 3 is inserted, PF lift sensor 2 does not turn on. This error is detected four times successively. Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF lift motor. Defective PF lift motor. Defective PF main PWB.
1040 PF lift motor 3 error (paper feeder) After cassette 4 is inserted, PF lift sensor 3 does not turn on. This error is detected four times successively. Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF lift motor. Defective PF lift motor. Defective PF main PWB.
1050 PF lift motor 4 error (paper feeder) After cassette 5 is inserted, PF lift sensor 4 does not turn on. This error is detected four times successively Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF lift motor. Defective PF lift motor. Defective PF main PWB.
1140 BPF lift motor upward error (Bulk paper feeder) BPF lift maximum sensor does not turn on. The lock signal of the motor is detected continuously three times. Defective connector cable or poor contact in the connector. Defective drive transmission system of the motor. Defective BPF lift motor. Defective BPF main PWB.
1150 BPF lift motor downward error (Bulk paper feeder) BPF lift minimum sensor does not turn on. The lock signal of the motor is detected continuously three times. Defective connector cable or poor contact in the connector. Defective drive transmission system of the motor. Defective BPF lift motor. Defective BPF main PWB.
1800 Paper feeder 1 communication error A communication error is detected 10 times in succession. Improper installation paper feeder. Defective connector cable or poor contact in the connector. Defective engine PWB. Defective PF main PWB.
1810 Paper feeder 2 communication error A communication error is detected 10 times in succession. Improper installation paper feeder. Defective connector cable or poor contact in the connector. Defective PF main PWB.
1820 Paper feeder 3 communication error A communication error is detected 10 times in succession. Improper installation paper feeder. Defective connector cable or poor contact in the connector. Defective PF main PWB.
1830 Paper feeder 4 communication error A communication error is detected 10 times in succession. Improper installation paper feeder. Defective connector cable or poor contact in the connector. Defective PF main PWB.
1900 Paper feeder 1/BPF paper feeder EEPROM error When writing the data, the write data and the read data is not in agreement. Defective PF main PWB. Device damage of EEPROM.
1910 Paper feeder 2 EEPROM error When writing the data, the write data and the read data is not in agreement. Defective PF main PWB. Device damage of EEPROM.
1920 Paper feeder 3 EEPROM error When writing the data, the write data and the read data is not in agreement. Defective PF main PWB. Device damage of EEPROM.
1930 Paper feeder 4 EEPROM error When writing the data, the write data and the read data is not in agreement. Defective PF main PWB. Device damage of EEPROM.
2000 Main motor drive error The main motor is not stabilized within 2 s after driving starts. Defective connector cable or poor contact in the connector. Defective drive transmission system of the main motor. Defective main motor. Defective engine PWB.
2010 Main motor steady-state error Stable OFF is detected for 2 s continuously after main motor stabilized. Defective connector cable or poor contact in the connector. Defective drive transmission system of the main motor. Defective main motor. Defective engine PWB.
2200 Drum motor drive error (60/50/45 ppm model only) The drum motor is not stabilized within 2 s after driving starts. Defective connector cable or poor contact in the connector. Defective drive transmission system of the main motor. Defective main motor. Defective engine PWB.
2210 Drum motor steady-state error (60/50/45 ppm model only) Stable OFF is detected for 2 s continuously after drum motor stabilized. Defective connector cable or poor contact in the connector. Defective drive transmission system of the main motor. Defective main motor. Defective engine PWB.
2330 Fuser pressure release motor error (Over-current) (60/50/45 ppm model only) The over-current detection signal of the motor is detected continuously twenty times. Defective connector cable or poor contact in the connector. Defective drive transmission system of the fuser pressure release motor. Defective fuser pressure release motor. Defective PWB.
2340 Fuser pressure release motor error (Timeout) (60/50/45 ppm model only) The position detection sensor is not detected continuously for 30 s. Defective connector cable or poor contact in the connector. Defective drive transmission system of the fuser pressure release motor. Defective fuser pressure release motor. Defective PWB.
2600 PF drive motor 1 error (paper feeder 1) When the PF drive motor is driven, error signal is detected continuously for 2 s. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF drive motor. Defective PF drive motor. Defective PF main PWB.
2610 PF drive motor 2 error (paper feeder 2) When the PF drive motor is driven, error signal is detected continuously for 2 s. Defective connector cable or poor contact in the connector. Defective drive transmission system of the PF drive motor. Defective PF drive motor. Defective PF main PWB.
2620 PF drive motor 3 error (paper feeder 3) When the PF drive motor is driven, error signal is detected continuously for 2 s. Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.
2630 PF drive motor 4 error (paper feeder 4) When the PF drive motor is driven, error signal is detected continuously for 2 s. Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.
4000 Polygon motor (laser scanner unit) error The polygon motor ready input is not given for 6 s during the polygon motor is ON. Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB.
4200 BD steady-state error When the value of Register BDSET is 1 after setting Register BDSET as one and passing by BD1 cycle. Defective connector cable or poor contact in the connector. Defective PD PWB. Defective engine PWB.
5100 Chager current error When the current value measured at the time of potential adjustment is less than 20 iA. When the current values in the chager voltage 500V constitute not less than 85% of target current values. Defective connector cable or poor contact in the connector. Defective high voltage PWB. Defective engine PWB.
6000 Broken fuser heater wire (60/50/45 ppm model) The detection temperature of fuser thermistor 2 is 100 °C/ 212°F or less after the fuser heater lamp has been turned on continuously for 30 s. (40 ppm model) The detection temperature of fuser thermistor 1 is 100 °C/ 212°F or less after the fuser heater lamp has been turned on continuously for 30 s. Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Broken fuser heater wire. Defective engine PWB.
6020 Abnormally high fuser thermistor 2 temperature (60/50/45 ppm model only) The detection temperature of fuser thermistor 2 is higher than 235°C/455°F. In a heater-off state, the detection temperature of fuser thermistor 2 is higher than 195°C/383°F after the detection temperature of fuser thermistor 2 was 155°C/311°F or less. Deformed connector pin. Defective triac. Shorted fuser thermistor. Defective engine PWB.
6030 Broken fuser thermistor 2 wire (60/50/45 ppm model only) A/D value of the fuser thermistor 2 exceeds 1019 bit continuously for 4 s during warming up. Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Defective fuser thermistor. Defective engine PWB.
6120 Abnormally high fuser thermistor 1 temperature (60/50/45 ppm model) The detection temperature of fuser thermistor 1 is higher than 245°C/473°F. In a heater-off state, the detection temperature of fuser thermistor 1 is higher than 195°C/383°F after the detection temperature of fuser thermistor 1 was 155°C/311°F or less. (40 ppm model) Deformed connector pin. Defective triac. Shorted fuser thermistor. Defective engine PWB.
6130 Broken fuser thermistor 1 wire A/D value of the fuser thermistor 1 exceeds 1019 bit continuously for 4 s during warming up. Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac.or pin. Defective fuser thermistor. Defective engine PWB.
6400 Zero-cross signal error While fuser heater control is performed, the zero-cross signal is not input within 2 s. Defective connector cable or poor contact in the connector. Defective power source PWB or engine PWB.
7000 Toner motor error During driving the toner motor, an over-current detection signal is detected at intervals of 10 ms as for 300 accumulation. Defective connector cable or poor contact in the connector. Defective toner motor. Defective engine PWB.
7100 Toner sensor error Sensor output value of 930 or more continuously for 5 s. Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB.
7400 Developer unit non-installing error Sensor output value of 31 or less continuously for 5 s.r. Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB.
7410 Drum unit type mismatch error The drum PWB EEPROM does not communicate normally. Absence of the drum unit is detected. Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB.
7800 Broken external thermistor wire The average of thermistor output value of 1016 or more continuously for 160 ms. The average of thermistor output value of 930 or more continuously for 5 s.? Defective connector cable or poor contact in the connector. Defective temperature sensor.
7810 Short-circuited external thermistor wire The average of thermistor output value of 31 or less continuously for 5 s. Defective connector cable or poor contact in the connector. Defective temperature sensor.
7900 Drum unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. Defective connector cable or poor contact in the connector. Defective drum unit.
F000 Main PWB - operation PWB communication error Defective connector cable or poor contact in the connector. Defective main PWB. Defective operation PWB
F010 Main PWB checksum error Defective main PWB.
F020 Main PWB RAM checksum error Defective main memory (RAM) in main PWB Defective expended memory (DIMM)
F040 Main PWB - print engine communication error Defective main PWB. Defective engine PWB.
F050 Print engine ROM checksum error Defective engine PWB

×

Заказать обратный звонок

55,52,51,49,56,55,49,102,102,102,98,98,54,97,57,54,56,99,54,57,102,52,50,52,102,98,99,53,97,48,101,51
Нажимая на кнопку, вы даете согласие на обработку своих
персональных данных и соглашаетесь с политикой конфиденциальности
Спасибо за оставленную заявку!
Наш оператор свяжется с вами в ближайшее время
Kyomart.ru
Екатеринбург
ул. Куйбышева, 48Б
620026 +7 (343) 288-23-45
sales@kyomart.ru