Коды ошибок Kyocera FS-1124

Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.
В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов. Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.
Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону 8 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.

Код ошибки	Описание ошибки	Причина ошибки
0030	FAX PWB system error Processing with the fax software was disabled due to a hardware problem.	Defective FAX PWB.
0070	FAX PWB incompatible detection Error Abnormal detection of FAX PWB incompatibility In the initial communication with the FAX PWB, any normal communication command is not transmitted.	Defective fax software. Defective FAX PWB.
0100	Backup memory read/write error(NOR) Flash returns an abnormal status.	Defective flash memory. Defective main PWB..
0120	MAC address data error For data in which the MAC address is invalid.	Defective flash memory. Defective engine PWB.
0130	Backup memory read/write error	Defective flash memory. Defective control PWB.
0140	Backup memory data error	Defective flash memory. Defective control PWB.
0150	Control PWB EEPROM error Detecting control PWB EEPROM (U17) communication error.	Improper installation control PWB EEPROM (U17). Defective control PWB. Data damage of control PWB EEPROM (U17).
0170	Billing counting error	Defective control PWB. Data damage of control PWB EEPROM (U17).
0180	Machine number mismatch Machine number of main and engine does not match.	Data damage of control PWB EEPROM (U17).
0420	Paper feeder communication error Communication error between control PWB and optional paper feeder.	Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion.
0830	FAX PWB flash program area checksum error A checksum error occurred with the program of the FAX PWB.	Defective fax software. Defective FAX PWB.
0840	Faults of RTC The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed.	Defective control PWB. The battery is disconnected from the control PWB.
0870	FAX PWB to control PWB high capacity data transfer problem High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times.	Improper installation FAX PWB. Defective FAX PWB or control PWB.
0920	Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX PWB.	Defective FAX PWB. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB.
2000	Main motor error The main motor ready input is not given for 2 s during the main motor is ON.	Defective connector cable or poor contact in the connector Defective drive transmission system of motor. Defective motor. Defective main PWB.
2610	PF paper feed motor error (paper feeder) The PF paper feed motor of cassette 2 ready input is not given for 2 s during the PF paper feed motor is ON.	Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective control PWB.
2620	PF paper feed motor error (Paper feeder) The PF paper feed motor of cassette 3 ready input is not given for 2 s during the PF paper feed motor is ON.	Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor..
3100	ISU home position error	Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion. Defective home position sensor. Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion. Defective ISU motor.
3200	Exposure lamp error The exposure lamp is not turned on.	Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective harness between CCD PWB (YC3) and inverter PWB (YC101), or improper connector insertion. Defective harness between inverter PWB (YC102) and exposure lamp, or improper connector insertion. Defective exposure lamp. Defective inverter PWB. Defective control PWB.
3300	AGC error After AGC, correct input is not obtained at CCD.	Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective exposure lamp. Defective CCD PWB. Defective control PWB.
3500	CPU - ASIC (CCD PWB) communication error An error code is detected.	Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective CCD PWB. Defective control PWB.
4000	Polygon motor synchronize error Polygon motor is not stabilized within 15 s since the motor is activated. After polygon motor is stabilized, the ready signal is not detected for 7 s continuously.	Defective connector cable or poor contact in the connector. Defective polygon motor. Defective main PWB.
4200	BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals.	Defective connector cable or poor contact in the connector. Defective APC PWB. Defective main PWB.
6000	Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 degrees or more after the fuser heater lamp has been turned on continuously for 8 s.(during ready or during print)	Defective connector cable or poor contact in the connector. Fuser thermostat triggered. Defective fuser heater. Defective main PWB.
6020	Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s	Shorted fuser thermistor. Defective control PWB.
6030	Broken fuser thermistor wire Average input AD given by the thermistor is less than 2 for 300msec.	Defective connector cable or poor contact in the connector. Broken fuser thermistor wire. Fuser thermostat triggered. Defective main PWB.
6400	Fixing control zero cross signal error The ZCROSS signal does not reach the main PWB for more than 2 s.	Defective connector cable or poor contact in the connector. Defective power source PWB. Defective main PWB.
F000	Communication Error between Main PCB and Panel PCB Communication failure during the start-up or operation. * : Only 3 in 1 25/26 ppm model, 4 in 1 20/21, 25/26 ppm model	Defective main PWB. Defective operation PWB.
F020	RAM R/W error The average AD value of the sensor input is smaller than 2 during SLP_RLY is off and 300 ms.	Defective main PWB.
F040	Communication Error between Main PCB and Engine PCB Communication is failed between the controller and the engine.	Defective main PWB.
F050	No Engine Main Program Engine program failure.	Defective engine software. Defective main PWB.