01 февраля 2018
05 декабря 2016
01 декабря 2016
Коды ошибок Kyocera FS-3040
Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.
В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов.
Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.
Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону
8 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.
Код ошибки | Описание ошибки | Причина ошибки |
---|---|---|
0030 | FAX control PWB system error Processing with the fax software was disabled due to a hardware problem. | Defective FAX PWB. |
0070 | FAX PWB incompatible detection Error Abnormal detection of FAX PWB incompatibility In the initial communication with the FAX PWB, any normal communication command is not transmitted. | Defective fax software. Defective FAX PWB. |
0100 | Backup memory device error | Defective flash memory. Defective main PWB. |
0120 | MAC address data error For data in which the MAC address is invalid. | Defective flash memory. Defective engine PWB. |
0130 | Backup memory read/write error | Defective flash memory. Defective control PWB. |
0140 | Backup memory data error | Defective flash memory. Defective control PWB. |
0150 | Control PWB EEPROM error Detecting control PWB EEPROM (U17) communication error. | Improper installation control PWB EEPROM (U17). Defective control PWB. Data damage of control PWB EEPROM (U17). |
0170 | Billing counting error | Defective control PWB. Data damage of control PWB EEPROM (U17). |
0180 | Machine number mismatch Machine number of main and engine does not match. | Data damage of control PWB EEPROM (U17). |
0420 | Paper feeder communication error Communication error between control PWB and optional paper feeder. | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. |
0830 | FAX PWB flash program area checksum error A checksum error occurred with the program of the FAX PWB. | Defective fax software. Defective FAX PWB. |
0840 | Faults of RTC The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed. | Defective control PWB. The battery is disconnected from the control PWB. |
0870 | FAX PWB to control PWB high capacity data transfer problem High-capacity data transfer between the FAX PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times. | Improper installation FAX PWB. Defective FAX PWB or control PWB. |
0920 | Fax file system error The backup data is not retained for file system abnormality of flash memory of the FAX PWB. | Defective FAX PWB. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB. |
1010 | Lift motor error During driving the lift motor, a motor overcurrent signal is detected for 5 s. This error is detected five times successively. | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the lift motor. Defective lift motor. Defective engine PWB or connect-R PWB. |
2000 | Main motor error The main motor ready input is not given for 2 s during the main motor is ON. | Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective control PWB. |
2200 | Drum motor steady-state error The drum motor ready input is not given for 2 s during the drum motor is ON. | Defective connector cable or poor contact in the connector. Defective drive transmission system of the drum motor. Defective drum motor. Defective engine PWB. |
3100 | ISU home position error | Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion. Defective home position sensor. Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion. Defective ISU motor. |
3200 | Exposure lamp error The exposure lamp is not turned on. | Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective harness between CCD PWB (YC3) and inverter PWB (YC101), or improper connector insertion. Defective harness between inverter PWB (YC102) and exposure lamp, or improper connector insertion. Defective exposure lamp. Defective inverter PWB. Defective control PWB. |
3300 | AGC error After AGC, correct input is not obtained at CCD. | Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective exposure lamp. Defective CCD PWB. Defective control PWB. |
3500 | Communication error between scanner and ASIC An error code is detected. | Defective connector cable or poor contact in the connector. Defective CCD PWB. Defective main PWB. |
4000 | Polygon motor (laser scanner unit) error The polygon motor ready input is not given for 6 s during the polygon motor is ON. | Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB. |
4200 | BD error (laser scanner unit) error | BD sensor does not detect laser beam due to condensation on the polygon mirror. Defective laser scanner unit. Defective control PWB. |
4700 | VIDEO ASIC device error Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. | Defective connector cable or poor contact in the connector. Defective main PWB or engine PWB. |
4700 | VIDEO ASIC device error Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. | Defective connector cable or poor contact in the connector. Defective main PWB or engine PWB. |
5100 | Main charger high-voltage error Five pages have been printed with the main charger output short-circuited. | Drum unit installed incorrectly. Engine PWB installed incorrectly. Defective engine PWB. |
6000 | Broken fuser heater wire The temperature does not reach 100°C/212°F after the fuser heater has been turned on continuously for 30 s. The temperature does not rise by 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 15 s during warm-up or at standby.(Only when the detection temperature is less than 200°C.) | Defective connector cable or poor contact in the connector. Fuser thermostat triggered. Broken fuser heater wire. |
6020 | Abnormally high fuser thermistor temperature Fuser thermistor detects abnormally temperature. | Shorted fuser thermistor. Defective control PWB. |
6030 | Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value). | Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire. |
6220 | Abnormally high fuser thermistor 1 temperature The temperature of the fuser thermistor 1 detects 255°C/491°F or more continuously for 3 s. | Shorted fuser thermistor 1. Defective engine PWB. |
6230 | Broken fuser thermistor 1 wire average AD value input from fuser thermistor 1 for 1.8 seconds is less than one. | Defective connector cable or poor contact in the connector. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Broken fuser heater wire. |
6400 | Zero cross signal error The zero cross signal does not reach the control PWB for specified time. | Defective harness between high voltage PWB (YC202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (YC201). Defective power source PWB. Defective control PWB. |
7000 | Toner motor lock error During driving the toner motor, a motor overcurrent signal is detected for 5 s. | Lump of toner inside toner container. Defective drive transmission system of the toner motor. Defective toner motor. Defective engine PWB. |
7410 | Drum unit non- installing error The drum unit is not installed or not installed properly. The drum PWB EEPROM does not communicate normally. | The drum unit is not installed. Defective connector cable or poor contact in the connector. Defective drum PWB EEPROM. Defective engine PWB. |
9500 | BRU communication error | IPU PWB error |
9510 | BRU PWB error | IPU PWB error |
9520 | BRU PWB data error | IPU PWB error |
F000 | Main PWB - operation panel PWB communication error | Defective main PWB. Defective operation panel PWB. |
F010 | Main PWB checksum error | Defective main PWB. |
F020 | Main PWB RAM checksum error | Defective main memory (RAM) on the main PWB. Defective expanded memory (DIMM). |
F040 | Main PWB - engine PWB communication error | Defective main PWB. Defective engine PWB. |
F041 | Main PWB - scanner communication error | Defective main PWB. |
F050 | Engine ROM checksum error | Defective engine PWB. |
F051 | Scan engine ROM checksum error | Defective engine PWB. |